This is a new digital thermometer with hygrometer, Jumbo LCD display, time alarm and the whole point timekeeping.
You could put it on a table or hang it on the wall to monitor the temperature and humidity.
Temperature / Humidity
¡æ /¡°F temperature switch display
The maximum / minimum temperature and humidity memory function
12/24 hour clock
The whole point timekeeping function
Temperature measurement range:-10¡æ¡« +50¡æ(-14¨H¡«+122¨H)
Temperature measurement accuracy:¡À1¡æ(1.8¨H)
Humidity measuring range: 10%¡«99% RH
Humidity measuring accuracy:¡À5% RH
Humidity resolution: 1%
Battery: AAA 1.5V
1.Pushed by the rear direction of the battery door, battery, and then replace the
Batterydoor, the machine can be used.
2.Key features:¡¾MODE¡¿switch the clock and alarm display mode/set the current
clock, alarm clock, 12 or 24 hour clock, date;¡¾ADJ¡¿adjust the value is set to the
project;¡¾MEMORY¡¿display memory in the highest & lowest temperature and
humidity value/clear memory of the maximum & minimum temperature and humidity
values;¡¾¡æ /¡°F switching temperature units¡¿¡æ(degrees Celsius)or¨H(F)
3.In the initial state, press¡¾MODE¡¿2 seconds, minutes and seconds the current
Time the number of start flashing, press¡¾ADJ¡¿few minutes and seconds can be
Adjusted continuously press¡¾MODE¡¿were set to ¡°Clock¡±,¡±12/24¡±,¡±month(M)¡±,
4. In the current clock mode(clock and minutes flash time between the two points
Per second), press¡¾MODE¡¿once, switch the display for the alarm clock mode
(clock and minutes between two points in not flashing),then press¡¾ADJ¡¿to
Switch¡°alarm¡±(Alarm) function/¡°The whole point of time¡±()function switch, and
Then press¡¾MODE¡¿2 seconds, you can set the alarm time, and start the¡°whole
point of time¡±function, ()symbol appears.
5. In alarm mode, without any operation automatically after one minute then return
to the current clock, then press to switch to the¡¾ADJ¡¿calendar display, 3 seconds
automatic ally returns the current clock, pressbutton to display the
temperature/humidity Last a clear(CLEAR) since the maxim um/minimum.
6.¡¾MEMORY¡¿can be displayed by the memory of temperature/humidity
Maximum(MAX)and minimum(MIN), press and hold¡¾MEMORY¡¿more than
7.In the bracket¡æand¨Hconversion key
2 seconds to clear the maximum/minimum.